Power density: 8.67, 13.0 w/in² (1.4, 2.0 w/cm²)
Watts, Volts: 104W to 1248W, 120V or 240V
Lengths: 2ft (60cm) to 12ft (360cm)
Width: ½in (1.3cm) or 1in (2.5cm)
Heat Capability: AIH, 900°F (482°C) AWH, 1400°F (760°C)
Lead Wires: 24" (61cm) on one end of the Tape.
Plug: Optional Molded Split Plug for 120V only.
Mono-Tape™ Element
The Heating Element is Multi- Strand Resistance wire, Braided with AMOX™ Yarn and Knitted into the Serpentine shape for immunity to Thermal Shock and Tensile Stress from expansion and contraction. The single, Multi-Strand element construction means that the lead wires will be located on each end of the Heavy Insulated Mono-Tape™.
Heavy AMOX™ or Fiberglass Overbraid
The Heavy Insulated Tapes have a flexible, braided sleeving over the element, to provide additional dielectric strength for wrapping onto conductive surfaces. (directly on metal) ½ Heavy Tapes will wrap around small 1/4" (6mm) tubing. Heat Capability to 900°F (482°C), or AMOX™ to 1400°F (760°C)
Optional, Molded Split Plug (Offered on 120v, only)
Mono-Tapes™ do not have a plug. If desired, they may ordered with the optional split molded plug on 120v only. Since there is no grounding circuit, the plugs are 2 prong. For Earth Ground Leakage protection, a Circuit Protector (30ma GFCI) is recommended.

Note: No molded plug option for 240v Tapes. Commercially available connectors may be installed.