Flexible Electric Heating Solutions

To properly install a Heating Tape, whether a Duo-Tape® on a pipe valve or fitting any electric heater, you will need Accessories. Typically, GT-108 Adhesive Tape and or RTV Silicone to hold the heater in place and Insulation over the top are a must. In addition, for wiring configurations in...

High Temperature Fiberglass Tape 500F max exposure. Ideal for securing heating tapes and providing thermal insulation on pipes valves and fittings.

High Temperature Fiberglass Material 900F Max. Fiberglass tie and wrap material for securing heating tapes and insulation.

High Temperature Fiberglass Braided Insulation 900F max exposure. Durable braided fiberglass insulation for pipes and heating applications.

AMOX Braided Fiberglass Sleeve 1400F max exposure. Premium high-temperature insulation sleeve for extreme heat applications.

Fluorocarbon impregnated Fiberglass with Silicone coating on one side. Premium Supermat insulation tape for high-performance thermal protection. 50 ft long X .3 in thick roll.

The BT-15 Controller is a Single Zone PID Temperature Controller, featuring easy, auto-tune programming and solid state output, in a rugged metal enclosure.The BenchTop unit has rugged simplicity to get you results without learning a custom programming language. This controller is ideal for most laboratory or industrial heating control requirements....

The BT-15 Limit Controller is a Single Zone PID Temperature Controller, with an additional, independent “push to reset” Limit Control with mechanical relay switching.The Limit control provides protection against any process malfunction, turning off all heating power if Limit is exceeded. The BenchTop unit has rugged simplicity to get you...

High quality components for some of our most popular Temperature Controllers are available from HTS/Amptek®. It starts with our 1/16th DIN PID Module. The BBA300 is intentionally configured for ease of use. Accurate with a handsome LCD color display, the BBA300 will be up and running without a long learning...

Nickel Crimp Barrels Pkg/10 pcs .125 in OD .020 in wall .375 in long. 100% A-Nickel crimp connectors for high-temperature wire connections.

Crimp Tool T and B to crimp CB-N-20-10 barrels. Professional-grade crimping tool designed specifically for CB-N-20-10 nickel crimp barrels.

HTS/Amptek® Heavy Duo-Tapes® are heating tapes with a protective AMOX™ overbraid and may operate to exposure temperatures of 1400°F (760°C), and are available in ½ inch and 1 inch widths and lengths from 2 feet to 16 feet. These are Heavy Insulated Tapes that may be used on metal conductive...

HTS/Amptek® Heavy Duo-Tapes® are heating tapes with a protective AMOX™ overbraid and may operate to exposure temperatures of 1400°F (760°C), and are available in ½ inch and 1 inch widths and lengths from 2 feet to 16 feet. These are Heavy Insulated Tapes that may be used on metal conductive...

HTS/Amptek® Heavy Mono-Tapes™ are heating tapes with a protective, fiberglass overbraid. Fiberglass, medium watt density Mono-Tapes™ are for use to 900°F (482°C). AMOX™, high watt density Mono-Tapes™ may operate to exposure temperatures of 1400°F (760°C). These are Heavy Insulated Tapes that may be used on metal conductive surfaces, as well...

HTS/Amptek® Heavy Mono-Tapes™ are heating tapes with a protective, fiberglass overbraid. Fiberglass, medium watt density Mono-Tapes™ are for use to 900°F (482°C). AMOX™, high watt density Mono-Tapes™ may operate to exposure temperatures of 1400°F (760°C). These are Heavy Insulated Tapes that may be used on metal conductive surfaces, as well...

Our industrial heating tapes are ideal for applications where temperature requirements go beyond the capabilities of standard issue cables and tapes. Able to withstand exceedingly high temperatures of up to 1400°F/ 760°C, they can be customized by width and length according to your needs. Made of a multiple strand, nickel...

Our industrial heating tapes are ideal for applications where temperature requirements go beyond the capabilities of standard issue cables and tapes. Able to withstand exceedingly high temperatures of up to 1400°F/ 760°C, they can be customized by width and length according to your needs. Made of a multiple strand, nickel...

Able to withstand temperatures of 185°F/85°C, our self-regulating, low exposure trace heating cable is designed for maintenance and freeze-protection applications. It’s an ideal fit for when temperature requirements are below those of traditional flexible heating tapes. Made with a metallic over braid, polyolefin jacket, it has a multilayer construction that...

High Temperature Lead Wire 150 ft. Spool. Premium lead wire for high-temperature wiring applications.

Our manual power controller offers a basic rheostat like voltage control design, complete with custom configurations. The model includes an in-line power controller, available with a 120 or 240-volt receptacle for power out, and a transformer control that allows you to regulate power from zero to full voltage. Everything about...

High Temperature Silicone Adhesive 10 oz tube. Premium RTV silicone for bonding and sealing heating tapes in high-temperature environments.

HTS/Amptek® ASR Silicone Rubber Extruded Duo-Tapes® may be operated to temperatures of 450°F (232°C) with short term exposure to 500°F (260°C). They are available in ½ inch and 1 inch widths and lengths from 2 feet to 40 feet. The element is a knitted Duo-Tape® for flexibility and durability, which...

HTS/Amptek® ASR Silicone Rubber Extruded Duo-Tapes® may be operated to temperatures of 450°F (232°C) with short term exposure to 500°F (260°C). They are available in ½ inch and 1 inch widths and lengths from 2 feet to 40 feet. The element is a knitted Duo-Tape® for flexibility and durability, which...

With their medium watt density (15 or 30 watts per feet) and industrial style heating of 120 to 240 watts, these silicone rubber extruded were built for industrial uses. Their rubber outer cover provides abrasion and dielectric protection, making them ideal for applications when moisture, chemical, and abrasion resistance is...

With their medium watt density (15 or 30 watts per feet) and industrial style heating of 120 to 240 watts, these silicone rubber extruded were built for industrial uses. Their rubber outer cover provides abrasion and dielectric protection, making them ideal for applications when moisture, chemical, and abrasion resistance is...

NOT DESIGNED FOR USE ON CONDUCTIVE SURFACES HTS/Amptek® Standard Mono-Tapes™ are heating tapes with without a protective fiberglass overbraid, and may only be used on non-conductive surfaces such as glass or ceramic. Fiberglass, medium watt density Mono-Tapes™ are for use to 900°F (482°C). AMOX™, high watt density MonoTapes™ may operate...

NOT DESIGNED FOR USE ON CONDUCTIVE SURFACES HTS/Amptek® Standard Mono-Tapes™ are heating tapes with without a protective fiberglass overbraid, and may only be used on non-conductive surfaces such as glass or ceramic. Fiberglass, medium watt density Mono-Tapes™ are for use to 900°F (482°C). AMOX™, high watt density MonoTapes™ may operate...

Tek-Rod® Heating elements are completely assembled and ready to use metal sheath heaters. The small diameter tubular shape is easy to form around tubing, valves and other hard to heat geometries, to provide a waterproof, corrosion resistant, electric heat source. Tek-Rod® elements are available in medium or high watt density,...

Simple installation and easy operation make our thermostatic control a headache free solution your temperature control needs. Offering a full 12 Amp output load-switching capability, it has a digital and manual dial control, waterproof sensor, and selectable calibration. Features including mechanical relay, explosion proof enclosures, and high load contractors make...

Thermostats, Temperature Switches and Power Controls are convenient solutions for quick regulation of electric Heating Tapes and Jackets. The LCZ (Triac) and Variable Transformer (Variac) can control an electric heater by adjusting the input power. These Controllers have no sensor feedback, but simply regulate as you’d use an adjustable “dimmer”...

The WM-15 Controller is a Single Zone PID Temperature Controller, featuring easy, auto-tune programming and solid state output, in a rugged metal enclosure.The WallMount unit has rugged simplicity to get you results without learning a custom programming language. This controller is ideal for most laboratory or industrial heating control requirements....

The WM-15 Limit Controller is a Single Zone PID Temperature Controller, with an additional, independent “push to reset” Limit Control with mechanical relay switching.The Limit control provides protection against any process malfunction, turning off all heating power if Limit is exceeded. The WallMount unit has rugged simplicity to get you...

HTS/Amptek® Wide Heavy Tapes are extra width heating tapes. Fiberglass, medium watt density, Wide Heavy Tapes are for use to 900°F (482°C) AMOX™, high watt density, Wide heavy Tapes may operate to exposure temperatures of 1400°F (760°C). These Heavy Insulated Tapes use a multiple lap, side-by-side design, to provide a...

HTS/Amptek® Wide Heavy Tapes are extra width heating tapes. Fiberglass, medium watt density, Wide Heavy Tapes are for use to 900°F (482°C) AMOX™, high watt density, Wide heavy Tapes may operate to exposure temperatures of 1400°F (760°C). These Heavy Insulated Tapes use a multiple lap, side-by-side design, to provide a...